500-171 FPIMPADM Implementing and Administering the FlexPod Solution (FPIMPADM)
Prerequisites
No pre-requisites for this course
Course Content
This course is a three-day ILT training program that is designed for system and network engineers and administrators implementing and administering FlexPod solutions. This course covers key implementation procedures, management and basic troubleshooting tasks on the Cisco Nexus 5548UP, Cisco UCS and NetApp storage. Upon completing this course, the learner will be able to meet these overall objectives: – Identify the architecture, features and components of FlexPod – Describe implementation parameters for Components including Cisco Nexus 5500 switches, Cisco UCS and NetApp clustered Data ONTAP – Describe FlexPod management tools
Course Outline
FlexPod Overview – Lab 1-1: Understanding Connectivity in the FlexPod Environment FlexPod Networking – Lab 2-1: Cisco Nexus 5548 LAN Deployment – Lab 2-2 Cisco Nexus 5548 SAN Deployment FlexPod Storage Lab 3-1: NetApp Cluster Setup Lab 3-2: Assign VLAN Tags to NetApp ifgrps – Lab 3-3: Create Vservers to Serve Fibre Channel and NFS FlexPod Compute Lab 4-1: Configure Cisco UCS B-Series – Lab 4-2: Install ESXi 5.1 to a Boot LUN FlexPod Virtualization Lab 5-1: Connect vCenter to ESXi Server FlexPod Management and Troubleshooting Tools – Lab 6-2: Install Microsoft Hyper-V
Who Should Attend
The primary audience for this course is as follows: – Network engineers, Network administrators, Field Engineers The secondary audience for this course is as follows: – System Engineers, Consulting System Engineers and Server Administrators
QUESTION 1
Which three are true for UCS 2208XP? (Choose three)
A. Works with FI 6120 and FI 6296
B. Supports FCoE
C. Supports native FC
D. Has 32 10Gb ports to each half-width slot in the chassis
E. Supports 4 port port-channel toward FI 6140
F. Connects to both Fabric Interconnects for high availability
Answer: A,B,D
Explanation:
QUESTION 2
Which two are required for single-wire management for Cisco UCS C-Series? (Choose two)
A. UCS Manager 2.1 or higher
B. VIC 1240
C. Redundant Nexus 2232PP FEX
D. 10 GB LOM
E. FI 6200 family only
F. VIC 1225
Answer: A,F
Explanation:
QUESTION 3
Which policy detail should be set if you want a server to be exempt from all power capping?
A. Create a Power Control Policy and set Power Capping to No Cap
B. Create a Power Control Policy select cap and set the priority to 1
C. Create a Power Group with the appropriate chassis and set the Group Budget Power Cap (W) to 0.
D. The UCS Power Cap feature should not be utilized in a FlexPod environment.
Answer: A
Explanation:
QUESTION 4
Which two are correct about VSAN configuration within UCS Manager? (Choose two)
A. VSAN ID and FCoE VLAN ID have to match
B. VSAN can be configured as fabric interconnect specific
C. We can delete VSAN 1
D. VSAN IDs 3840-4079 are not available regardless of the Fabric Interconnect mode
E. VSAN can be configured as a global parameter
F. In addition to SAN tab, VSANs can be configured under UCSM Server tab as well
Answer: B,E
Explanation:
QUESTION 5
Which two are true about Fabric Interconnect L1 and L2 ports in cluster mode? (Choose two)
A. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade
B. Ports are primarily used for management traffic, but can be used for data traffic as well
C. Fabric Interconnect ports L1 and L2 are 10 Gb links
D. Ports can only run as a port channel
E. Ports can only run as individual links
F. Ports can run as a port channel or as individual links
Answer: A,D
Explanation:
Click here to view complete Q&A of 500-171 exam
Certkingdom Review
Best Cisco 500-171 Certification, Cisco 500-171 Training at certkingdom.com