H35-211 HCNP-Access (Huawei Certified Network Professional–Access)

1 H35-211 HCNP-Access V2.0 Certification Exam

The following table lists the exams, exam codes, exam names, and exam durations of Huawei Access certification programs. This document describes the H35-211 HCNP-Access V2.0 exam outline. For other exam outlines, please refer to the corresponding training materials or obtain them from the website of Huawei, http://support.huawei.com/learning.

Certification Program Exam Code Exam Name Exam Duration Pass Score/ Total Score
HCNP-Access H35-211 HCNP-Access
(Huawei Certified Network Professional–Access) 90 min 600/1000

2 H35-211 HCNP-Access Exam Outline

2.1 Exam Content
The HCNP-Access exam covers but not limited to 10G PON principles, Vectoring & G.fast Principles, multicast Basics, VoIP principle in-depth (H.248 protocol introduction, SIP protocol in-depth), security features, networking protection, QOS features, troubleshooting, access network planning and design, eSight Triple Play service configuration, U2000 Triple Play service configuration, and so on.

2.2 Key Points
10% I. 10G GPON and Vectoring & G.fast
1. Technical Principles of 10G GPON.
2. Typical Networking of 10G GPON.
3. xDSL Development.
4. Vectoring Principle and Application.
5. G.fast Principle and Application.

10% II. VoIP Principle In-depth
1. SIP Protocol Principle.
2. SIP Commands and Messages.
3. SIP Protocol Layered Structure
4. SIP Message Exchange Process
5. H.248 Protocol Overview
6. H.248 Protocol Message
7. H.248 Call Process

10% III. Multicast Service Provisioning and Configuration
1. Multicast Architecture and Address
2. Multicast Principle.
3. Multicast Packet Forwarding.
4. IPTV Service Configuration and Maintenance

30% IV. FTTx advanced features
1. Network Protection Features, including Type B, Type C protection, Ethernet link aggregation, Ethernet port Protection Group.
2. PON Security Features, including Common Attacks and Defensive Measures, Security Features and Applications of the OLT (user plane, control plane, management plane).
3. PON QoS Features, including QoS Overview, Traffic Classification, Priority-based Processing, Traffic Policing, Congestion Avoidance, Congestion Management, ACL Policy, OLT QoS Control Model, OLT E2E QoS Control.

20% V. Service configuration on NMS
1. Huawei eSight PON Service Configuration.
2. Huawei iManager U2000 Service Configuration.

20% VI. FTTx Network Planning and Design, FTTx Service Troubleshooting
1. The process of FTTx planning and design, networking and traffic planning, data planning, network performance planning, and ODN planning.
2. Troubleshooting Process and Analysis Method, ONU Fault Locating Method, HSI/VoIP/IPTV Service Fault Locating Method.

Note:
The exam content provided here serves only as a general guide to candidates. Other contents not mentioned here may also be included in the actual exam.

2.3 References
HCNP-Access V2.0 Training Courses
Huawei Access products documents

2.4 Training Program Recommended
HCNP-Access V2.0 Training

Click here to view complete Q&A of H35-211 exam
Certkingdom Review
, Certkingdom PDF Torrents

MCTS Training, MCITP Trainnig

Best Huawei H35-211 Certification, Huawei H35-211 Training at certkingdom.com

Click to rate this post!
[Total: 0 Average: 0]

Comments |0|

Legend *) Required fields are marked
**) You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>